The basics of implementing industrial glue for glass will usually be the same no matter what the opposing substrate will be. There are some exceptions, as with anything, but if there are specific instructions, the adhesive manufacturer will generally state that in their directions for use.
First start by positioning the two substrates or pieces exactly the way you intend to bond them. This will provide you with a visual presentation of the finished product prior to implementing the glass glue as well as providing a visual of exactly where the glass adhesive needs to be applied for the most powerful and attractive results. In certain instances this might not be possible, for example if you are working with big pieces, or adhering glass in locations which might be not easily reached. Nevertheless, whenever it’s possible, pre-fit your pieces.
The surfaces of both substrates need to be clean and free from anything that may impede the bond. Apply the glass epoxy to both substrates and join them. Based on the task or the specific application, you may or may not need to bind the two sections with each other with clamps. Allow the bond to cure for several hrs before disturbing it or relocating it.
Industrial glass adhesive is used in such a wide selection of purposes that its removal can vary from occasion to occasion. For purposes here, and due to the fact it’s essentially the most frequent type of application, we will discuss removal of glass to glass adhesive.
Always bear in mind when you are working with glass, it’ll crack if not handled with care.
Start by removing as much of the epoxy as possible with out the usage of chemical substances. Assuming you will be re-applying and adhesive, utilizing a great deal of chemical substances could weaken the second bond you create. Using scrapers to loosen the epoxy will be the ideal approach to achieve removal. Loosen the casing and seals around the glass and cautiously remove them. More than likely any seal you take away, you will need to exchange rather than reuse, but it’s worth a go to try and save it.
When you’ve removed the seals and casings, it’s a matter of elbow grease. The adhesive will most likely be hard and dry, which makes its removal pretty straightforward. Using your scraper, apply pressure to the glass and chisel the hard glass adhesive away.
The industrial adhesive manufacturers have created solvents which are extremely effective for removing glues and sealants but often times rubbing alcohol is effective. It’s also safe on most substrates. Don’t apply the solvent to the surface itself, liberally apply it to a dry cloth and lay the soaked cloth across the remaining adhesive. Solvent evaporates quickly so the cloth slows this evaporation and allows the liquid to work longer on the adhesive.
For a especially difficult job you could possibly need to repeat the process of scraping then applying solvent a number of times.
It’s generally not too difficult to remove industrial glass adhesive from glass, other substrates pose a more challenging situation, but once more your adhesive manufacturer will likely be capable to provide you with much more information on the various processes of removing adhesive from different substrates.
For more information about Adhesive System’s structural adhesives or any other adhesives please contact us at 877.740.1250 x20. You can also send us an email at email@example.com For general information about all of our adhesive products you can visit our website at www(dot)instantca(dot)com. If you don’t find exactly what you’re looking for, tell us about your application and we’ll help you find something that will work, or customize something specific for you.