Installing Outside Mount Blinds: A Step-by-Step Guide

Outside mount blinds are perfect for windows that do not have window depth or has a little of it. Because of such, less amount of flat space is needed for outside mount blinds.

Doing some repairs on blinds seems a complex task to some people, however if you learn how to install these window blinds, the task will become a breeze. Basically, the blinds are fixed on the outer opening of the window which is connected to the window frame. For a detailed guide in installing your outside window blinds, follow the following steps:

Step 1: Measure the Window’s Exterior Border
With a tape measure and a pencil, measure the width of the window’s exterior edges starting from the top frame, to the middle and then down the bottom portion. Jot down each measurement on paper.

Fit your blinds into the window’s frame and then measure again the size of the frame from side to side. To achieve uniformity, round off your measurements to the nearest 1/8 inch.

Step 2: Measure the Height and the Dimensions of your Window
Measure the height of the outside border of your window along the middle and then to the left side and to the right side as well. Note all measurements and check which part requires more length of the blinds. Then, on the window frame’s top portion, mount your blinds. Acquire the outside mount dimension which is intended for the window blinds. For most types of window blinds, about one and one half overlap along each side is necessary, so around three inches must be added to the recorded measurement.

Step 3: Install your Window Blinds
Mounting the blind brackets into the window is often the most difficult step in fixing the blinds up. Be sure to lengthen the mount blinds. Measure the blinds’ dimensions and then verify if it will perfectly fit the window. Two inches or the exact measurement of the frame to which the brackets are attached must be added to the previously recorded measurements.

Bear in mind that when securing outside mount window blinds, there’s a need to add up some extra width and height to your mount blinds. Doing so will provide you with a perfectly well-covered window. Another thing to remember regarding outside mount blinds is to only buy window blinds which can sit close enough to the surface of the wall so that less amount of light will enter a given space.

If you are looking for good quality, stylish, and affordable window blinds, check out Outdoor Blinds Perth by checking out the link given.

Wood Fence Maintenance Tips in Winters

Between very cold temperatures, wind, and rain, winter could be a huge challenge to timber fences. Spending time out in the extremely cold environment is probably the last thing many homeowners would want to do in winter, but a bit extra maintenance can help prolong the life of your timber fence and also lessen possible problems that you’ll face in springtime.

What the Cold Months Does to a Timber Fence

While heat and sunlight are generally the biggest enemies with regards to damage to a timber fence, the persistent changes in temperatures and moisture levels of the winter could also cause serious damage. Below is a good idea on how the freezing weather can affect timber fences:

Snow and Rain:

The fibers of wood fences will weaken when exposed to such natural elements for long periods of time. It also leads to the development of rot, mold, and mildew. A waterproof sealant is the best protection against such elements. It’s also very important to keep organic matters such as leaves and twigs, from getting stuck between the boards, as this hinders the circulation of air and creates a trap for moisture to develop. In addition, such materials decompose and will cause damage to the fence.

Changing Temperatures:

Changes in temperature will cause the timber to contract and expand, which can eventually lead to knots falling out, leaving the structure with knotholes. If this problem is ignored, the knotholes will invite pests and encourage rot.

Shifting Soil:

Too much rain could cause water to soak into the soil and develop landslides, shifts, and sinkholes that can affect the supporting posts of timber fences. Throughout the winter season, it is best to keep an eye on your timber fence to ensure that it stays strong, straight, and free of rot.


Overhanging branches of trees could break when the weight of ice and snow gets unbearable. As branches fall, the fence could get damaged. Check trees near your timber fence, and trim away any branches that pose a threat.

Maintenance Tips During Winter Season

Using a quality sealant or stain before the winter season comes is your first line of defense against winter damage. But there are important steps to take throughout the winter season:

* Check your fence after a relatively strong fence. Check it for any damages and see to it that the posts are still plumb. To check this, run a piece of string along the posts’ tops. Look for rises or dips in the string, then inspect the posts to know if they require repairs. Fixing any damages now will keep the problem from getting worse throughout the cold months.

* See to it that the cement footings are free from dust, dirt, and other unwanted materials. This may seem pointless but doing it reduces the chances that the cement will develop cracks due to moisture buildup and changes in temperatures.

If you’re looking for quality, durable, affordable fencing materials for your winter damaged timber fence, simply visit by checking out the link.

The Benefits of Using a Lattice Fencing

Modern lattice fences are great for veranda enclosures, spa pens and garden walls. This type of fence looks pretty and offers privacy. Choose a tighter model if you like maximum privacy. Compared to the regular lattice pattern, the stretched weave could make it a bit hard for people to take a peep of your home.

The open weave model has bigger designs. These may not block the view of your garden completely. But this type of fence looks very beautiful. This type is often used in porches and gardens so vines could climb to the top. There’s another design called the topper. It is great for people who like the looks of lattice and like some privacy at the same time. The structure is made from long boards and attached on top of the fence. This could also be used for making plant boxes or sun decks.

The spindle lattice fence is popular among homeowners. It doesn’t contain any crisscross. Spindles produce a vertical pattern making it unique but it does not provide high privacy level. Unfinished wood is likewise appropriate for lattice fences. Unfinished refers to untreated or raw but quality wood boards. From here, you can come up with any finish you want.

Some of the most common materials are redwood, birch, and cedar. The timber could be painted or stained. It looks natural even with such treatment. Timber lattice also has many advantages. One is you could easily add ornamentation to the wood. The material is economical. Besides, this is a natural product that’s which is environmentally friendly compared with vinyl. Wood could also be a durable material for outdoor use.

Vinyl lattice can sometimes be a better option than timber. It is fairly durable. Likewise, colour choices will not be a problem. The drawback of vinyl is that it lacks resistance against mold, mildew, and rotting. It needs regular maintenance and cleaning. Vinyl tends to crack over time and isn’t as eco-friendly as timber.

The lattice fencing is great for concealing unpleasing views and makes your property look more gorgeous. It could also serve as a shade for your outdoor balcony. This is more low-cost than using a roof with all inherent benefits that the roofing material provides. Lattice ensures protection against the harsh sunlight while maintaining a good air circulation.
If you are looking for quality wood for constructing lattice fence or you are looking for professional and expert fence builders, visit timber lattice Dandenong by following the link.