Securing Outside Mount Window Blinds

Outside mount blinds are perfect for windows which have no window depth or has a little of it. So, less flat space is required for outside mount window.

Fixing window seems a complex task to some, however if you know the steps in mounting outside mount blinds, the task will be simple. Basically, the mount blinds should be fixed on the window’s outer opening which is connected to the window frame. For a detailed guide in mounting your outside blinds, follow the steps bellow.

Step 1: Measure the Exterior Border of Your Window
With a tape measure and a pencil, measure the width of the outside edges of your window beginning from the top frame, to the middle and then down the bottom area. Take note of each measurement on paper.

Fit the blinds into the frame of your window and then measure again the size of the frame from side to side. To achieve uniformity, round off your measurements to the nearest 1/8 inch.

Step 2: Measure the Height and Dimensions of your Window
Measure the height of the window’s outside border along the middle and then to the right and left sides. Note all measurements and determine which part needs more length of the blinds. And then finally, on the top portion of the window frame, place your blinds. Acquire the outside mount dimension which is intended for the blinds. For most kinds of blinds, about 1 and 1/2 inch overlap along every side is required, therefore three inches must be added to the recorded measurement.

Step 3: Secure your Outside Mount Blinds
Placing the blind brackets into the window is usually the most tricky task in fixing the blinds up. Lengthen the mount blinds. Measure the dimensions of your blinds and then verify if it will fit perfectly in the window. Two inches or the exact measurement of the frame to which the brackets are attached must be added to the previously recorded measurements.

Remember, when securing outside mount blinds, there is a need to add up extra height and width to your mount blinds. Adding extra dimensions will provide you with a well-covered window. Another thing to remember regarding outside mount blinds is to only get blinds that could sit close enough to the surface of your wall so that less amount of light will enter a given area in your house.

If you’re looking for quality, stylish, and affordable window blinds, check out Outdoor blinds in perth by checking out the provided link.

How to Choose Timber for Fencing and Decking

Choosing among different types of wood for a deck or a fence can be tough, because of the many different options available. One thing that will play a big part in your decision is aesthetics. If you’re looking for a certain texture or colour, your options will be narrowed down a little.

But aesthetics isn’t the only factor to consider. There are a number of practical differences among various kinds of timber that could have major consequences for your home improvement project. Certain types and qualities of wood are a lot of suitable than others.

Below are some important things to keep in mind:

Hardwood or Softwood

The terms “softwoods” and “hardwoods” from whether trees (like Spotted Gum, Merbau, Mahogany, and Jarrah) cover their seeds, or just leave the seeds fall on the ground and uncovered, (like Cypress and Pine).

Balsa, which is one of the softest kinds of wood is actually a kind of hardwood. It’s one of the very few exceptions to the rule. Generally speaking, softwoods come from evergreens, and hardwoods from deciduous trees.

Hardwoods grow slowly and denser compared to softwoods. Because of this, they are generally more costly, tougher, and harder. Also, they are more difficult to cut and work with, but will wear much longer. They’re able to endure weathering a lot more and they don’t need much maintenance. There are around 100 times more hardwoods species than there are softwoods. But simply because softwoods grow faster and easier to work with, they are used more often in construction than hardwoods.

New Wood or Seasoned Wood

The age of the timber and whether or not it has been seasoned will play a huge part in how long it can last. Unseasoned or “green” wood will have a great deal of the timber’s original moisture content. As the moisture leaves the timber over time, the wood will twist, shrink, and warp, ruining your fence or deck.

So, it is important that the timber you’ll go with is not simply seasoned, but seasoned properly. Often, seasoning is performed in a kiln with sawn wood. Timber that gets dried rapidly will shrink on the surface and will compress the moisture-rich timber underneath, which can make the timber very unreliable once pressure is released. Also, the timber will lose its moisture naturally and become seasoned if it is left out to air dry, making older wood a better option.

If you’d like to get quality softwoods and hardwoods for constructing a deck or a fence, simply contact the team at Serano by clicking on the provided link.

Installing Outside Mount Blinds: A Step-by-Step Guide

Outside mount blinds are perfect for windows that do not have window depth or has a little of it. Because of such, less amount of flat space is needed for outside mount blinds.

Doing some repairs on blinds seems a complex task to some people, however if you learn how to install these window blinds, the task will become a breeze. Basically, the blinds are fixed on the outer opening of the window which is connected to the window frame. For a detailed guide in installing your outside window blinds, follow the following steps:

Step 1: Measure the Window’s Exterior Border
With a tape measure and a pencil, measure the width of the window’s exterior edges starting from the top frame, to the middle and then down the bottom portion. Jot down each measurement on paper.

Fit your blinds into the window’s frame and then measure again the size of the frame from side to side. To achieve uniformity, round off your measurements to the nearest 1/8 inch.

Step 2: Measure the Height and the Dimensions of your Window
Measure the height of the outside border of your window along the middle and then to the left side and to the right side as well. Note all measurements and check which part requires more length of the blinds. Then, on the window frame’s top portion, mount your blinds. Acquire the outside mount dimension which is intended for the window blinds. For most types of window blinds, about one and one half overlap along each side is necessary, so around three inches must be added to the recorded measurement.

Step 3: Install your Window Blinds
Mounting the blind brackets into the window is often the most difficult step in fixing the blinds up. Be sure to lengthen the mount blinds. Measure the blinds’ dimensions and then verify if it will perfectly fit the window. Two inches or the exact measurement of the frame to which the brackets are attached must be added to the previously recorded measurements.

Bear in mind that when securing outside mount window blinds, there’s a need to add up some extra width and height to your mount blinds. Doing so will provide you with a perfectly well-covered window. Another thing to remember regarding outside mount blinds is to only buy window blinds which can sit close enough to the surface of the wall so that less amount of light will enter a given space.

If you are looking for good quality, stylish, and affordable window blinds, check out Outdoor Blinds Perth by checking out the link given.