How to Choose Decking And Fencing Timber

Choosing among different types of timber for fences and decks could be challenging, because of the many different choices available. One vital thing that will play a huge part in your decision is aesthetics. If you’re looking for a specific colour or textured look, your options are narrowed down a bit.

But aesthetics isn’t the only thing you should take into account. There are primary practical differences among various types of timber that could have major consequences for your home project. Keep in mind that specific qualities or types of wood are a lot more suitable than others.

Below are some important points to keep in mind:

Hardwood or Softwood

The terms “hardwoods” and “softwoods” are derived from whether trees (like Jarrah, Merbau, Mahogany, and Merbau) cover their seeds, or simply leave their seeds fall on the ground and uncovered, (like Cypress and Pine).

Balsa, one of the softest types of woods is actually a type of hardwood. But it’s one of the very few exceptions to the rule. Generally speaking, softwoods come from evergreens, and hardwoods from deciduous trees.

Hardwoods grow significantly slower and are denser compared to softwoods. This makes hardwoods generally harder, tougher, and more expensive. They’re also a lot more difficult to cut and work with, but will typically wear much longer. They are able to resist weathering a lot more and they don’t need much maintenance. There are around 100 times more types of hardwoods than there are softwoods. But because softwoods grow much faster and easier to work with, they’re used more commonly in construction than hardwoods.

New Timber or Seasoned Timber

The age of wood and whether it has been seasoned or not will play a great part in its longevity. Unseasoned or “green” timber will contain a huge deal of the timber’s original moisture content. As such moisture leaves the wood over time, the wood will twist, shrink, and warp, ruining your deck or fence.

So, it’s important that the wood you will go with is not simply seasoned, but seasoned the right way. Usually, seasoning is performed in a kiln with sawn wood. Timber that gets dried so fast will shrink on the surface and will compress the moisture-rich timber underneath, which can make the timber very unstable once pressure is released. The timber will also lose its moisture naturally and become seasoned if it is left out to air dry, making older timber a better option.

If you are looking for quality softwoods and hardwoods for installing a deck or a fence, simply contact the Team at Serano by clicking on the link provided.

How to Build a Good Quality Deck

A deck is certainly a great addition to a property. This additional space increases the value of your property. Unlike the other rooms in your home, the deck has to endure exposure to natural elements. Written here are several considerations that could help you build a deck that can last for many, many years and one that fits your lifestyle best.

1. Size of the Deck
Think about how you’ll use the deck and decide on the deck’s size based on your needs. Remember that no material for decking is absolutely maintenance free, so constructing a very big deck means spending much time maintaining a space you don’t use. Also, the deck’s size has architectural implications. Your contractor, architect, or engineer must size the pier footings, joists, and beams so the deck meets structural requirements and becomes stable.

Also, note that adding square footage to it will also increase the number of footings you must dig. Over-sizing your deck even by 2 feet in a certain direction will require one extra row of footings. Talk to your designer regarding the deck’s structural implications so that you would be able to have a deck that is the perfect size for your household at the right price.

2. Access to the Deck
The more challenging it is to get to the deck, the less you’ll use it for sure. A sliding door could be left open if there is a screen panel installed to keep all insects out. If your deck plan needs doors that swing outward. Make sure you check your screen options before finalizing your decision.

3. Decking Material
There are certain species of wood that hold up well as a material for decking. Redwood and cedar have natural properties that could resist the elements. Pressure-treated lumber is a soft wood that has been chemically treated to make it resistant to exposure outdoors. The arsenic which was used before isn’t used anymore in pressure-treating wood. Merbau, Yellow Balau, Spotted Gum, Silvertop Ash, and Iron Bark are examples of good wood species for constructing decks.

4. Safety Features
Unless your deck is constructed at grade level, you’ll need to incorporate railings. There are measurements to keep in mind. Limit the space between the horizontal slats and balusters to less than four inches. Most codes for building decks allow a railing height to be between 36 and 42 inches. But bear in mind that a railing that’s 36 inches in height will encourage people to sit on it, defeating its purpose.

If you need help building your deck or are looking for quality decking materials, check out Serano Timber by clicking on the given link.

Tips to Building a Quality Deck

A deck is definitely a great addition to a property. This additional space increases the value of your home. Unlike the other spaces in your house, the deck has to endure the exposure to natural elements. Below are four considerations that could help you build a deck that could last for many years and one that fits your lifestyle best.

1. The Size of the Deck
Think about how you intend to use your deck and decide on the size based on your needs. No material for decking is completely maintenance free, so building a huge deck will mean spending extra time maintaining a space you do not really use. Also the size of the deck has architectural implications. Your contractor, architect, or engineer should size the pier footings, joists, and beams so your deck meets structural requirements and feels stable for the individuals staying on it.

Additionally, bear in mind that adding square footage to your deck will also increase the number of footings you must dig. Over-sizing a deck even by 2 feet in one direction will require an additional row of footings. Discuss the structural implications with your designer so you can have a deck that is the perfect size for your whole family at the price that fits your budget best.

2. Access to the Deck
The more difficult it is to get to your deck, the less you’ll use it for sure. A sliding door could be left open if there’s a screen panel installed to keep insects out. If your deck plan needs doors that swing outward. Check screen options before making up your mind.

3. Decking Material
There are certain wood species that hold up well as a material for decking. Redwood and cedar have natural properties that can resist the effects of elements. Pressure-treated lumber is a soft wood that has been treated with chemicals to make it capable of enduring weather conditions. The arsenic which was used before isn’t used anymore in pressure-treating wood. Merbau, Spotted Gum, Iron Bark, Silvertop Ash, and Yellow Balau are examples of good wood species for building decks.

4. Safety Features
Unless your deck is constructed at grade level, you’ll need to add railings. There are measurements to bear in mind. Limit the space between the horizontal slats and balusters to less than four inches. Most codes for constructing a deck allow a railing height to be anywhere from 36 and 42 inches. But bear in mind that a railing that’s 36 inches in height will encourage people to sit on it, defeating its purpose.

If you need help building your deck or are looking for good quality decking materials, visit SeranoTimber by clicking on the given link.