Essential Deck Building Tips and Guidelines

is not an easy thing to do. However, it can be completed with just basic carpentry skills and the these essential tips:

1. Get pressure treated wood.

First, you need to buy pressure treated lumberwood. Try not to buy regular 2×4’s, as these only give you a deck that can last for only a couple of years. If you don’t prefer the idea of getting pressure treated lumber, then consider buying a higher quality wood like redwood or cedar. Oftentimes, pressure treated wood is no longer manufactured with arsenic, making it durable and safe to use. While it’s significantly less expensive to get non-pressure treated wood, it will cost you more in the long run, as you’ll need to repair or replace some parts or your entire deck.

2. Get the right type of nails and screws.

Some deck building codes require using stainless steel or a very specific type of galvanized screw. This is when you’re using pressure treated lumber. Some types of steel can corrode the wood, resulting to weak joints. So check building codes before building your own deck.

3. Measure.

Measure the wood at the store before you bring it home with you. For example, if you need 11 feet long boards, you should to measure to make sure they’re exactly what you need. If the boards are 10 feet 1 inch long each, you will need to spend valuable effort and time cutting off the extra 1 inch from each of the deck boards.

4. Check with your local codes.

Find out if you must have a building permit, as most key cities do require it. Call your local inspection office for you to know what you should do. You will spend more money if you do not observe local codes. They can be very specific about the size of post you must use, and the types of fasteners.

5. Do not forget, bark side up!

When installing the boards, always remember, “bark side up”. Orient each deck board so the end grain growth rings curve upward. Otherwise, cupping will happen; and liquid will pool in the middle and wouldn’t be able drain off your deck boards.

If you want your deck to last for a long span of time, you should choose materials wisely, especially the type of lumber you will use. Get top quality Dandenong timber supplies from Serano Timber. Drop by their website to learn where and how to get these quality wood for deck building: http://www.seranotimber.com.au/.

Share this post