A tree must be inspected regularly, especially before and after a storm comes. A bigger tree has increased potential for hazard compared to a smaller tree. A tree that presents hazards with significant structural defects is likely to fail, and can possibly cause damage to properties and/or injury to individuals or animals nearby. This why it’s paramount that you are aware of warning signs of a hazardous tree.
1. History.
The factors that can affect the health of a tree include but not limited to: past tree care, landscape and construction activities.. Also, tree topping, trenches, and constructions can negatively impact a tree. If its roots have been cut or disturbed, it could result to instability.
2. Lean.
A tree does not have to grow straight up. But those trees with a significant lean may imply that something wrong is going on. Check if there are exposed roots and cracked soil surrounding the base of the tree. Things things may imply that the tree has started to lean.
3. Multiple Trunks.
Some trees have more than one trunk. The multiple trunks of a tree can break if they are weakly attached. A tree with a huge trunk with splits will tend to fail. Inspect a tree for cracks and splits when trunks are connected.
4. Weakly Attached Branches.
Check on the branches where they are linked to the trunk of a tree. Tight V-shaped unions are more likely to break than open U-shaped links. Also, a tree with cracks, splits, and/or some branches developing from the same area on the trunk can pose problems.
5. Decay and Cavities.
Check branches and/or the trunk for decayed or hollow spots and peeling bark. Significantly big decay spots and decay on areas where branches connect with the trunk, can imply serious issues on the structure of the tree. Mushrooms growing on or at the base of the tree are signs of decaying wood.
6. Branch and Trunk Splits or Cracks.
Check the trunk and the main branches for cracks. Huge and deep cracks or splits can mean structural weakness and the need for careful evaluation.
7. Hangers.
These are broken branches which are still partly connected to the tree. Whether partly or fully separated from the trunk of the tree, these branches would most likely fall unexpectedly and thus they should be removed immediately. Also, stubs left by the broken branches ought to be removed to prevent the spread of decay.
8. Deadwood.
Deadwood are the dead branches. They have to be removed, as they’ll fall eventually. Branches over 2 inches in diameter can cause serious damage or injury when they fall, especially when they fall from a significantly high spot.
If you see one or more of these warning signs in your tree, contact a tree service company immediately and get expert services in tree removal Perth. Check out the website of WA Tree Works to meet certified and highly trained and skilled tree loppers and tree pruners: WATreeWorks.com.au.