A tree should be inspected regularly, especially before and after the coming of a storm. A bigger tree has a greater hazard potential compared to a smaller tree. A dangerous tree with significant defects on its structure is likely to fail, and could possibly result to damage to properties or injury to individuals or animals nearby. This why it is vert important that you’re aware of warning signs of a defective and hazardous tree.

1. History.
Some of the things that can affect the health of the tree are: past tree care, landscape and construction activities. Also, tree topping, trenches, and constructions can have bad impacts on a tree. If its roots have been disturbed or cut, the result could be instability.

2. Lean.
A tree does not have to grow straight up. However, those with a significant lean may indicate that something wrong is going on. Check if there are cracked soil and/or exposed roots around the base of a tree. These signs may mean that the tree has begun to lean.

3. Multiple Trunks.
Some trees have more than one trunk. The multiple trunks of a tree could break if they’re not attached properly. A tree with a significantly big trunk with splits or cracks would most likely fail. Inspect a tree for cracks when trunks are connected.

4. Weakly Attached Branches.
Check on the branches where they’re attached to the trunk of a tree. Tight V-shaped links are more highly prone to breakage than open U-shaped connections. Also, a tree with splits, cracks and/or some branches arising from the same spot on the trunk could pose problems.

5. Decay and Cavities.

Check branches and/or the trunk for peeling bark and decayed or hollow areas. Significantly huge decay pockets and decay on areas where branches connect with the trunk, could mean serious issues on the structure of the tree. Conks or mushrooms growing on or at the base of the tree can be signs of decaying wood.

6. Branch and Trunk Splits or Cracks.

Check the trunk and large branches for splits or cracks. Big and deep cracks could mean structural weakness and the need for careful evaluation.

7. Hangers.
These are broken branches which are still partly attached to the tree. Whether partially or completely separated from the tree, these branches tend to fall unexpectedly and thus they should be detached immediately. Also, stubs left by the broken branches ought to be removed to prevent the spreading of decay.

8. Deadwood.
These are are dead branches. They have to be completely removed, as they’ll eventually fall. Branches over 2 inches in diameter could cause serious damage or injury when they fall, especially when they fall from a relatively high spot.

If you see one or more of the discussed signs in your tree, contact a tree care company immediately and get professional help in tree removal Perth. Check out the website of WA Tree Works to meet qualified and highly trained and skilled tree loppers and tree pruners: WATreeWorks.com.au.