Get Wooden Floors Shiny With Floor Sanding

Has the solid hardwood floor at your home lost its shine? If so then its the right time for undertaking floor sanding in order to restore the lost lustre making it look attractive. Although most people look for professionals to do the task of sanding and floor refurbishment more here, they may be done by individuals by themselves without having to pay huge sums to the contractors and labourers. To give the ground a shining look, you do require some special tools like a drum sander and an edge sander. Finding these equipments isn’t difficult as numerous home restore companies stock this equipment and lease out machines which are necessary for reviving the lost shine of the home surface.

The first step in base refinishing is to take away the old seal and strip it bare. For doing this, you would have to take out the rugs, remove all furniture piece to check out any nails, staples or anything underneath the carpet. If you discover any tacks and nails then its best to either pull them out or to hammer them deep down in the ground to make sure that the sandpaper does not get torn and to steer clear of the whole sheet from getting damaged.

You will find different types of floor sanding London available for restoring the gloss of various types of surfaces. Read about the kinds of sanders that you’d need for floor sanding at your home. Renting a sander for completing the timber bases is really a much better idea. While using the sanders, it is important to move them all the time as they move rapidly and can create deep hollows in the floor when they are kept on one spot for long. For those who have never done floor refurbishment work then you can ask the sanding devices rental company to give you a demonstration of how variations of sanders could be operated and managed.

It is best to rent or buy the heaviest type of available sandpaper when you undertake floor job. Once you have put the sandpaper, make sure you run the sander equipment in the direction of the grain and never against it. Even and long strokes will give a better refinish to the floor. Pull and push motion rather than the swiping motion will work best to recover the lost lustre to the flooring. Shift to a light grain sandpaper after usage of a heavy paper to take out the lines and scratches. A Hoover may be used to take away the dust while modifying sandpapers.

Moving over from grits ranging to raised numbers of as much as Sixty to eighty as well as 100 can help to get a shinier stage. When the floor sanding process is completed, it can be left naturally or stained to provide a better look. When staining the floor, it’s a good option to keep the windows open to allow the staining dry quickly due to proper air-flow. Application of three or higher coats of lacquer can also protect the floor from losing its shine within short time. Floor sanding usually takes a few days and hence you should keep your patience to get the desired result.

Share this post